JVC KY-F560 instruction manual System Screen, Cancel

“SYSTEM” Screen

Settings in bold are factory settings

Item		Function/Variable Values
“ASPECT	For setting the screen size for recorded video signals.
RATIO”	“4:3”	: Image output at aspect ratio of 4:3.
	“16:9”	: Image output at aspect ratio of 16:9.
		The vertical resolution deteriorates as compared to the
		images of 4:3.
“NEGATIVE”	Signals output from the [VIDEO OUT] terminal can be output as negative signals.
	“ON”	: Outputs negative signals.
	“OFF”	: Outputs normal video signals.
“PIXEL	For setting whether to perform white spot correction.
COMPEN”	“CANCEL”	: Do not perform white spot correction.
	“EXECUTE”	: Perform white spot correction.
	☞ Page 26 ‘White Spot Correction’
“H PHASE”	Adjust the horizontal (H) phase of this unit with respect to signals input to the
	[GENLOCK IN] terminal (external sync signals).
	Increase value	: Adjusts horizontal phase back.
	Decrease value	: Adjusts horizontal phase ahead.
	{Variable Values : –128 - 0 - +127}
“SC COARSE”	Coarse tune the subcarrier (SC) phase of this unit with respect to signals input to
	the [GENLOCK IN] terminal (external sync signals).
	Increase value	: Adjusts phase back.
	Decrease value	: Adjusts phase ahead.
	{Variable Values : 0˚, 90˚, 180˚, 270˚}
“SC FINE”	Fine tune the subcarrier (SC) phase of this unit with respect to signals input to the
	[GENLOCK IN] terminal (external sync signals).
	Increase value	: Adjusts phase back.
	Decrease value	: Adjusts phase ahead.
	{Variable Values : –128 - 0 - +127}
“PAGE BACK”	Press the [SET] button to return to the “MENU” screen when cursor is at this
	position.

English

E-41