JVC KY-F560 1. Getting Started (continued)

E-8

3Fastening Screws for Camera

Mounting Bracket

(M2.6 x 6 mm, 3 pcs)

Caution

Make sure to use screws that are supplied with

this unit.

Use of screws that are 6 mm or longer in length

may give rise to malfunction of the unit.

4Camera Mounting Screw Holes

(1/4-20UNC)

Use when mounting this unit

to fixer or swivel bases.

(Use screws that are 7 mm

or shorter in length.)

1Lens Mounting Ring/Lens Lock

Lever

When dismounting the lens, do so by holding

the lens and turning the lens lock lever in the

anti-clockwise direction.

When mounting the lens, check that the guide

pins of the lens are aligned, followed by turning

the lens lock lever in the clockwise direction to

fasten.

☞Page 14 ‘Mounting the Lens’

2Camera Mounting Bracket

This is attached to the bottom face of the cam-

era when supplied. Mount it to the top surface

according to the conditions of use. Mount the

fastening screws for the camera mounting

bracket 3 to the screw holes on the top surface.

☞Page 16 ‘Mounting the Camera’

Part Names and Functions

Front / Bottom

1. Getting Started (continued)

KY-F560

COLOR VIDEO CAMERA

4

1

2

3

7mm

and

below

Contents

Main KY-F560 KY-F560 COLOUR VIDEO CAMERA INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MODE DEMPLOI COLOUR VIDEO CAMERA FARBVIDEOKAMERA APPAREIL VIDEO EN COULEURS Supplement SAFETY PRECAUTIONS Page 5. Setting Via the Menu Screen 6. Others Notations and Symbols Used in This Manual Caution Note 1.Getting Started Features Points to Note During Use Characteristic CCD Phenomena Precautions During Handling 3 4 1. Getting Started (continued) 5 6 Back 7 8 When menu screen is displayed 1. Getting Started (continued) # [GENLOCK IN] External Sync Signal Input Terminal % Back Description of Terminals Power Input Terminal (Mini DIN 8 Pin, Female) 1 82 7 2. Preparation Before Shooting Basic System Sync Signals (Composite Video Signals or Black Burst Signals) The diagram below illustrates connection of a basic system. When connecting Applied System The diagram below illustrates connection of an applied system. When connecting KY-F560 STANDARD PACKAGE 2. Preparation Before Shooting (continued) Mounting the Lens 2. 4. 3. 5. Connecting the Power Supply Mounting the Camera 2. Preparation Before Shooting (continued) Precautions to Prevent Camera From Falling Caution 3. Setting and Adjustment During Shooting Page Setting procedures for Auto White (AUTO1,AUTO2) 3. Setting and Adjustment During Shooting (continued) White Balance Adjustment White Balance Adjustment (continued) Error Display Full-time Auto White (FAW) Function White Shading Adjustment 3. Setting and Adjustment During Shooting (continued) 8. 9. 5. 6. White Shading Adjustment (continued) 4. Various Modes of Shooting Shooting the Computer Monitor 8. 5. 6. Output of Negative Image 2. 3. 4. 5. Preparation White Spot Correction How To Use Detection of White Spots 4. Various Modes of Shooting (continued) 2. 3. 4. 5. Operation Notes White Spot Correction (continued) 5. Setting Via the Menu Screen Flow of Menu Screens Normal Screen Page 42 MAIN MENU Flow of Menu Screens (continued) Page 33 NORMAL Page 33 Page 38 Setting Procedures EXPOSURE Screen EXPOSURE Screen (continued) ADVANCED EXPOSURE Screen WHITE BALANCE Screen WHITE BALANCE Screen (continued) PROCESS (1/2) Screen PROCESS (1/2) Screen (continued) KNEE Function PROCESS (2/2) Screen PROCESS (2/2) Screen (continued) MATRIX ADJUST Screen SYSTEM Screen FILE MANAGE Screen Display the FILE MANAGE screen. Save the set value. Retrieve file. Reset the set value. FILE MANAGE Screen (continued) Connecting the Remote Control Unit Connection Operation 6. Others Notes RM-LP55 When operating the menu function of this unit from RM-LP55 } 1. Installation of Option Card 6. Others (continued) Connecting Optional Devices Specifications 6. Others (continued) Specifications (continued)