JVC KY-F560 Various Modes of Shooting, Shooting the Computer Monitor, Button Use

4. Various Modes of Shooting

Shooting the Computer Monitor

When shooting images of computer monitors or displays, horizontal bands will appear on the screen. To eliminate the bands, it will be necessary to align the shutter speed with the scanning frequency of the monitor.

Computer Monitor

3. 4.

- - - EXPOSURE - -	-
I R I S MODE	AUTO
MANUA L L EVE L	- - - - - -
GA I N	ST E P
LEVE L	0 d B
SHUTTER	S T EP
LEVE L	NORMA L
ADVANCED EXPOSURE . .
PAGE BACK

“EXPOSURE” Screen

1.	Press the [MENU] button for 1-2 seconds.
	The “MENU” screen will be displayed.
2.	Use the [	/	] buttons to select “EXPOSURE..”, then press
	the [SET] button.
3.	Use the [	/	] buttons to select “SHUTTER”, then press the
Band	[SET] button.
	The set value starts blinking and adjustment is possible.
4.	Use the [	/	] buttons to set value to “V.SCAN”, then press
	the [SET] button.
5.	Use the [	/	] buttons to select “LEVEL”, then press the [SET]
	button.
6.	Use the [	/	] buttons to adjust the shutter speed. Pay atten-

tion to the screen
If black bands are visible : use the [	] button to lower the shut-
ter speed
If white bands are visible : use the [	] button to increase the

shutter speed

7. When bands are decreased to the minimum, press the [SET] button. This will be recorded in the memory of the unit.

8. Press the [MENU] button for 1-2 seconds. The normal screen will be displayed.

5. 6.

- - - EXPOSURE - -	-
I R I S MODE	AUTO
MANUA L L EVEL	- - - - - -
GA I N	STEP
LEVE L	0 d B
SHUTTER	V. SCAN
LEVE L	1 / 5 0 s
ADVANCED EXPOSURE . .
PAGE BACK

Note

Vertical scanning frequency may vary with computer types and there are cases when bands may not be fully eliminated. In addition, frequency may also differ depending on the software used.

E-24