Tuner
Listening to the radio
1 | 4 | 2 | 3 |
These are the basic steps necessary to operate the radio. More advanced tuner operation is explained starting on page 12.
1BAND indicator
Shows which band the radio is tuned to, AM or FM.
2FREQUENCY indicator
Shows to which frequency the tuner is tuned.
3PRESET NUMBER indicator
Shows what preset has been selected.
4STEREO () indicator
Shows that the frequency selected is being broadcast in stereo.
1Press SOURCE to select the tuner.
2Use VOLUME to adjust the sound level. Rotate to increase or decrease the volume.
3Press BAND/ESC to select a band.
Press BAND/ESC until the desired band is dis- played, F1, F2, F3 for FM or AM.
4To perform manual tuning, press 2 or 3 with quick presses.
The frequencies move up or down step by step.
5To perform seek tuning, press and hold 2 or 3 for about one second and release.
The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
Section
03
• You can cancel seek tuning by pressing either |
| |
2 or 3 with a quick press. | English | |
• If you press and hold 2 or 3 you can skip | ||
| ||
broadcasting stations. Seek tuning starts as |
| |
soon as you release the buttons. |
| |
Note |
| |
• When the frequency selected is being broad- | Español | |
cast in stereo the STEREO () indicator will | ||
| ||
light. |
|
Deutsch Français Italiano
Nederlands
En 11
