Pioneer DEH-P4400 06Audio Adjustments, Introduction of audio adjustments, 1AUDIO display, Notes

Section

06Audio Adjustments

Introduction of audio adjustments

41

5 3 2

1AUDIO display

Shows the audio adjustments status.

2LOUD indicator

Appears in the display when loudness is turned on.

3SW indicator

Appears in the display when subwoofer is turned on.

4F1 or F2 indicator

The F1 or F2 indicator lights depending on the SFEQ setting.

5CUSTOM indicator

Appears in the display when equalization is adjusted.

Press AUDIO to display the audio function names.

Press AUDIO repeatedly to switch between the following audio functions:

FADER (balance adjustment)—EQ(equalizer curve fine adjustment)—BASS(bass)—TRE(treble)—LOUD(loudness)—SUB.W(subwoofer output)—80HZ0(subwoofer setting adjustment)—SLA(source level adjustment)

•When selecting the FM tuner as the source, you cannot switch to SLA.

•To return to the display of each source, press

BAND/ESC.

Notes

•If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display.

•Audio Menu functions change depending on the rear output setting in the Initial Setting Menu. Refer to Switching the rear output set- ting on page 33.

26En