Section
05
Playing tracks in a random order
Random play lets you play back tracks in a ran- dom order within the repeat range, MCD (multi- CD player repeat) and DSC (disc repeat).
1 Select the repeat range.
Refer to Repeating play on page 19.
2 Press FUNCTION to select RANDOM.
Press FUNCTION until RANDOM appears in the display.
3 Press 5 to turn random play on.
RANDOM :ON appears in the display. Tracks will play in a random order within the previously selected MCD
4Press ∞ to turn random play off. RANDOM :OFF appears in the display. Tracks will continue to play in order. 
Scanning CDs and tracks
While you are using DSC (disc repeat), the beginning of each track on the selected disc plays for about 10 seconds. When you are using MCD
1 Select the repeat range.
Refer to Repeating play on page 19.
2 Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the display.
3 Press 5 to turn scan play on.
SCAN :ON appears in the display. The first 10 seconds of each track of the present disc (or the first track of each disc) is played.
4When you find the desired track (or disc) press ∞ to turn scan play off.
SCAN :OFF appears in the display. The track (or disc) will continue to play.
• If the display has automatically returned to the playback display, select SCAN again by pressing FUNCTION.
Note
•After track or disc scanning is finished, nor- mal playback of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop playback of the CD.
1 Press FUNCTION to select PAUSE.
Press FUNCTION until PAUSE appears in the display.
2 Press 5 to turn pause on.
PAUSE :ON appears in the display. Play of the current track pauses.
3 Press ∞ to turn pause off.
PAUSE :OFF appears in the display. Play will resume at the same point that you turned pause on. 
20En
