Pioneer DEH-P44 Audio Adjustments, Setting the sound focus equalizer, Using balance adjustment

Audio Adjustments

Setting the sound focus equalizer

Clarifying the sound image of vocals and instru- ments allows the simple staging of a natural, pleasant sound environment.

Even greater listening enjoyment will be obtained if seating positions are chosen care- fully.

•FRT1 boosts the treble on the front output and the bass on the rear output.

FRT2 boosts the treble and the bass on the front output and the bass on the rear output. (The bass boost is the same for both front and rear.) For both FRT1 and FRT2 the HI setting provides a more pronounced effect than the LOW setting.

1Press SFEQ to select the desired SFEQ mode.

Press SFEQ repeatedly to switch between the following setting:

FRT1-HI(front 1-high)—FRT1-LOW(front 1- low)—FRT2-HI(front 2-high)—FRT2-LOW(front 2-low)—CUSTOM(custom)—SFEQ OFF (off) Selected mode (e.g., F1) appears in the display.

2Press 2 or 3 to select the desired position. Press 2 or 3 until the desired position appears in the display.

L (left)—C(center)—R(right)

Note

•If you adjust the bass or treble, CUSTOM memorizes an SFEQ mode in which the bass and treble are adjusted for personal prefer- ence.

Section

06

Using balance adjustment

You can select a fader/balance setting that pro-	English
vides an ideal listening environment in all occu-
pied seats.
1 Press AUDIO to select FADER.
Press AUDIO until FADER appears in the dis-
play.	Español
• If the balance setting has been previously
adjusted, BAL will be displayed.
2 Press 5 or ∞ to adjust front/rear speaker
balance.
Each press of 5 or ∞ moves the front/rear
speaker balance towards the front or the rear.	Deutsch
• FADER :F15 – FADER :R15 is displayed as the
front/rear speaker balance moves from front to
rear.
• FADER : 0 is the proper setting when only two
speakers are used.
• When the rear output setting is subwoofer,
you cannot adjust front/rear speaker balance.
Refer to Switching the rear output setting on	Français
3 Press 2 or 3 to adjust left/right speaker
page 33.
balance.
When you press 2 or 3, BAL : 0 is displayed.
Each press of 2 or 3 moves the left/right
speaker balance towards the left or the right.	Italiano
• BAL :L9 – BAL :R9 is displayed as the left/right
speaker balance moves from left to right.

Nederlands

En 27