INTRODUCTION
1 INTRODUCTION
1.1 How to use this Manual
DO NOT ATTEMPT TO USE THIS EQUIPMENT WITHOUT UNDER- STANDING THIS MANUAL.
To ensure safe operation, read the entire manual carefully, especially the section on “Safety Instructions and Warnings”, before installing, operating, or servicing this equipment.
If anything is not completely understood, please contact your supplier for more details. Failure to comply with warnings in this manual may result in injury.
Keep this manual with the lift and refer to it as required. Contents of this manual are subject to change without prior notice to users.
Throughout this manual, the following symbols may appear. Pay particular attention to the information provided under these headings. These special annotations are easily recognized as follows:
WARNING: this symbol is intended to alert the user to hazards or unsafe practices, which could result in serious bodily harm.
CAUTION: this symbol is intended to alert the user of the presence of
important operating and maintenance instructions, which could prevent product damage or possible personal injury.
NOTE: this symbol offers helpful information concerning certain operating procedures.
Additional copies of this manual can be purchased by contacting your supplier. Include the User Manual product number and equipment identification numbers.
1.2 Equipment Identification
The unit's identification number (specification, model, serial number) appears on a silver nameplate attached to the back of base.
1.3 Receipt of Equipment
Upon receipt of the equipment, verify it against the packing list to ensure it is complete and inspect the equipment for possible damage due to shipping. If there is any damage, DO NOT USE the equipment and notify the carrier immediately to file a claim. Provide complete information concerning damage claims or shipping errors to your supplier. Include all equipment identification numbers and group part numbers (if any) as described above along with a full description of damaged parts.
1.4 Key to Symbols
The following symbols are used on lifter’s attachment labels:
This symbol is required to be displayed on regulated products for sale in the European Market. It indicates that the product complies with applicable European Directives related to health, safety, environment and consumer protection.
Safe Working Load represents the SWL maximumoperation. load the lifter is rated for safe
The following symbols are used on sling labels and related to washing instructions:
71ºC Maximum washing temperature 71°C (140°F) permanent cycle.
Do not use bleach.
Do not dry clean.
Tumble dry low temperature.
Do not iron.
Please refer to individual sling labels for complete instructions regarding washing and drying.
VOYAGER 420 - 550 – 800 (rev. 3) | 5 |
