SUPER MICRO Computer 5015A-EHF-D525 XAdvanced Chipset Control, XNorthbridge Configuration

Chapter 7: BIOS

XAdvanced Chipset Control

The items included in the Advanced Settings submenu are listed below.

XNorthbridge Configuration

DRAM Frequency

This option allows the user to select the desired frequency setting for the onboard memory modules. The options are Auto, 667 MHz and 800 MHz.

Configure DRAM Timing by SPD

This option allows the user to select the desired DRAM timing for the onboard memory modules. The options are Enabled and Disabled. The following will appear when Disabled is selected:

DRAM CAS# Latency

The options are [3], [4], [5], and [6]

DRAM RAS# to CAS# Delay

The options are 3 DRAM Clocks, 4 DRAM Clocks, 5 DRAM Clocks, and 6 DRAM Clocks.

DRAM RAS# Precharge

The options are 3 DRAM Clocks, 4 DRAM Clocks, 5 DRAM Clocks, and 6 DRAM Clocks.

DRAM RAS# Activate to Precharge

The options are 9 DRAM Clocks, 10 DRAM Clocks, 11 DRAM Clocks, 12 DRAM Clocks, 13 DRAM Clocks, 14 DRAM Clocks, and 15 DRAM

Clocks.

Initiate Graphics Adapter

This option selects which graphics adapter to use as a primary boot device. The options are Other, Onboard VGA and Slot6.

Internal Graphics Mode Select

This option selects the amount of system memory used by the onboard graphics adapter. The options are Enabled, 8MB.

7-7