5-6
SUPERSERVER 5015A-EHF-D525 User's Manual
Figure 5-3. DIMM Installation
Position the SO-DIMM mod-1.
ule's bottom key so that it
aligns with the receptive point
on the slot.
Insert the SO-DIMM module 2.
vertically at about a 45 degree
angle.
Press down until the module 3.
locks into place. The side clips
will automatically secure the
SO DIMM module, locking it
into place.
To Remove: Use your thumbs 4.
to gently push the side clips
near both ends away from the
module. This should release
it from the slot. Pull the SO
DIMM module upwards.
Align
Insert this end fi rst.
Press down until
the module locks
into place.
Locking clip
Locking clip