TABLE OF CONTENTS |
|
|
Introduction ..................................... | page | 2 |
General Information ......................... | page | 2 |
Location .......................................... | page | 3 |
Clearances ....................................... | page | 3 |
Appliance Specifications .................. | page | 4 |
Gas Vent Rule .................................. | page | 4 |
Framing Specifications .................... | page | 5 |
Typical Installation Sequence .......... | page | 5 |
Installation ....................................... | page | 5 |
Vent System Installation .................. | page | 6 |
Field Wiring ..................................... | page | 7 |
Connecting Gas Line ........................ | page | 7 |
Outside Air Kit Installation ............... | page | 8 |
Log and Rockwool Installation ........ | page | 9 |
Appliance Operation ........................ | page | 9 |
Manual Llimit Switch ....................... | page | 9 |
Millivolt Appliance Checkout ............ | page | 10 |
Electronic Appliance Checkout ......... | page | 10 |
Adjustments .................................... | page | 10 |
Finishing Requirements ................... | page | 11 |
Cold Climate Insulation .................... | page | 11 |
Installation Accessories ................... | page | 11 |
Gas Conversion Kits .................. | page 12 |
This installation manual will help you obtain a safe, efficient, dependable installation for your appliance and vent system.
Please read and understand these instructions before beginning your installation.
INTRODUCTION
The millivolt appliances are designed to operate on either natural or propane gas. A millivolt gas control valve with piezo ignition system provides safe, efficient operation.
2
The electronic appliances are designed to operate on either natural or propane gas. An electronic direct intermittent pilot system provides safe, efficient operation. External electrical power is required to operate these units.
These appliances comply with National Safety Standards and are tested and listed by War- nock Hersey (Report No. J20006722) to ANSI Z21.50 - 2000 (in Canada, CSA 2.22 - 2000), and
Installation must conform to local codes. In the absence of local codes, installation must comply with the current National Fuel Gas Code, ANSI Z223.1 (NFPA 54). (In Canada, the current CAN/CGA B149 installation code.) Electrical wiring must comply with local codes. In the absence of local codes, installation must be in accordance with the National Electrical Code, NFPA 70 - (latest edition). (In Canada, the current CSA C22.1 Canadian Electric Code.)
DO NOT ATTEMPT TO ALTER OR MODIFY THE CONSTRUCTION OF THE APPLIANCE OR ITS COMPONENTS. ANY MODIFICATION OR ALTERATION MAY VOID THE WARRANTY, CERTIFICATION AND LISTINGS OF THIS UNIT.
WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE INJURY OR PROPERTY DAMAGE. REFER TO THIS MANUAL. FOR ASSISTANCE OR ADDITIONAL INFORMATION CONSULT A QUALIFIED INSTALLER, SERVICE AGENCY OR THE GAS SUPPLIER.
GENERAL INFORMATION
Note: Installation and repair should be performed by a qualified service person. The appliance should be inspected annually by a qualified professional service technician. More frequent inspections and cleanings may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that the control compartment, burners and circulating air passage ways of the appliance be kept clean.
S'assurer que le brùleur et le compartiment des commandes sont propres. Voir les instructions d'installation et d'utilisation qui accompagnent l'apareil.
Provide adequate clearances around air openings and adequate accessibility clearance for service and proper operation. Never obstruct the front openings of the appliance.
WARNING: THESE FIREPLACES ARE VENTED DECORATIVE GAS APPLIANCES. DO NOT BURN WOOD OR OTHER MATERIAL IN THESE APPLIANCES.
These appliances are designed to operate on natural or propane gas only. The use of other fuels or combination of fuels will degrade the performance of this system and may be dangerous.
Input of appliance is 15,000 BTU/HR.
Gas | Orifice |
| |
Type | Size | Elevation | |
|
|
| |
Natural | #49 | 0 - 4500' | |
(.073) | (0 - 1370 m) | ||
| |||
|
|
| |
Propane | (.045) | 0 - 4500' | |
(0 - 1370 m) | |||
|
| ||
|
|
|
Nominal operating pressures for the manifold side of the gas control system are; 3.5 inches water column (0.87 kPa) for natural gas models and 10 inches water column (2.49 kPa) for propane gas models.
Do not use these appliances if any part has been under water. Immediately call a qualified, professional service technician to inspect the appliance and to replace any parts of the control system and any gas control which have been under water.
Ne pas se servir de cet appareil s'il a été plongé dans l'eau, complètement ou en partie. Appeler un technicien qualifié pour inspecter l'appareil et remplacer toute partie du système de contrôle et toute commande qui ont été plongés dans l'leau.
This appliance may be installed in an af- termarket permanently located, manufactured home (USA only) or mobile home, where not prohibited by local codes. This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases, unless a certified kit is used.Cet appareil peut être installé dans un maison préfabriquée
Cet appareil doit être utilisé uniquement avec les types de gaz indiqués sur la plaque signalétique. Ne pas l'utiliser avec d'autres gaz sauf si un kit de conversion certifié est installé.