TABLE OF CONTENTS

 

 

Firebox/Log Set Reference Chart

page

2

General Information

page

2

Inventory

page

2

Tools/Building Supplies

page

2

Important Safety Information

page

2

Codes

page

3

Combustion and Ventilation Air

page

3

Location of firebox

page

4

Clearances

page

4

Assembly Steps

page

5

Gas Line Installation

page

5

Firebox Framing

page

6

UVF-500 Specifications

page

6

Firebox Installation

page

7

UVF-600 Specifications

page

7

Framing Specifications

page

8

Canopy Installation

page

9

Optional Equipment

page

9

Firebox finishes

page

10

Replacement Parts

page

10

Accessories/Components

page

10

Replacement Parts List

page

11

GENERAL INFORMATION

These ventless firebox enclosures are designed to accept all ANSI Z21.11.2 approved Decora- tive Type Unvented Gas Log Room Heaters. For the appropriate Unvented Gas Log Room Heater model, refer to the chart below. Refer to the installation instructions provided with the log sets for detailed instructions.

The UVFC Series are unvented fireboxes. They feature a self-contained heat-circulating system.

The UVFR Series is a conventional radiant- heat unvented firebox.

This installation manual will enable you to obtain a safe, efficient and dependable instal- lation of your room heater system.

Do not alter or modify the firebox or its com- ponents under any circumstances. Any modifi- cation or alteration of the firebox system, in- cluding but not limited to the firebox and acces- sories, may void the warranty, listings and approvals of this system and could result in an unsafe and potentially dangerous installation.

These Built-In Unvented Fireboxes have been tested and approved as Ventless Firebox Enclo- sures for Gas-Fired Decorative Type Ventless Room Heaters to IAS 2-97.

WARNING: THESE BUILT-IN UN- VENTED FIREBOXES HAVE ONLY BEEN TESTED AND APPROVED FOR USE WITH ANSI Z21.11.2 UN-

VENTED GAS LOGS.

DO NOT ATTEMPT TO BURN SOLID WOOD FUELS, OTHER GAS LOG SETS OR ANY OTHER COMBUSTIBLE MATE- RIALS IN THIS UNVENTED FIREBOX.

Check the inventory list to be sure that you have all the necessary parts in usable condition. Also check for concealed damage.

Inventory

Unvented Gas Firebox

Canopy

Gas Connector Fittings

Installation and Operating Instructions

Tools and Building Supplies

Normally Required

Tools Should Include: Phillips screwdriver Hammer

Saw and/or sabersaw Level

Measuring tape Electric drill and bits Pliers

Square

Piping complying with local codes Pipe wrench

Tee joint

Pipe compound

Building Supplies Should Include:

Framing materials

Wall finishing materials

Caulking materials (noncombustible) Fireplace surround materials (noncombustible)

IMPORTANT SAFETY INFORMATION

INSTALLER: PLEASE LEAVE THESE INSTRUC- TIONS WITH THE OWNER.

OWNER: PLEASE RETAIN THESE INSTRUC- TION FOR FUTURE REFERENCE

IMPORTANT: BEFORE STARTING YOUR FIRE- BOX INSTALLATION, READ THESE INSTALLA- TION INSTRUCTIONS CAREFULLY TO BE SURE

2

Log Set Sizing Reference Chart

Unvented Firebox

Unvented Room Heater Log Set

 

 

 

 

 

Model

Natural

Propane (L.P.G)

 

 

 

 

 

UVFC-500

VFGL-18/24MN/VN-3

VFGL-18/24MP/VP-3

 

 

PVFGL-18MN/VN

PVFGL-18MP/VP

 

 

 

 

 

UVFC-600

VFGL-24/28MN/VN-3

VFGL-24/28MP/VP-3

 

 

PVFGL-24MN/VN

PVFGL-24MP/VP

 

 

 

 

 

UVFR-500

VFGL-18/24MN/VN-3

VFGL-18/24MP/VP-3

 

 

PVFGL-18MN/VN

PVFGL-18MP/VP

 

 

 

 

 

UVFR-600

VFGL-24/28MN/VN-3

VFGL-24/28MP/VP-3

 

 

PVFGL-24MN/VN

PVFGL-24MP/VP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

YOU UNDERSTAND THEM COMPLETELY AND IN ENTIRETY. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD CAUSE A HEATER MALFUNCTION RESULTING IN SERIOUS IN- JURY AND/OR PROPERTY DAMAGE.

WARNING: ANY CHANGE TO THIS UN- VENTED ROOM HEATER CAN BE DAN- GEROUS. IMPROPER INSTALLATION OR USE OF THIS HEATER CAN CAUSE SERI- OUS INJURY OR DEATH FROM FIRE, BURNS, EXPLOSION OR CARBON MON- OXIDE POISONING.

Page 2
Image 2
Superior UVFC-500, UVFR-600, UVFC-600 Table of Contents, General Information, Vented GAS Logs, Important Safety Information