To replace the battery:

1.Insert a coin or the opening tool included in the sales package into the slot located on the battery compartment cover on the backside of your Suunto G6.

2.Turn the coin/tool counterclockwise until it is aligned with the open position marker.

3.Remove the battery compartment cover and the O-ring, and discard them. Ensure that all surfaces are clean and dry.

4.Remove the old battery carefully.

5.Place the new battery into the battery compartment under the metal flap, with the positive side facing up.

6.With the O-ring in the correct position, replace the battery compartment cover and turn it with the coin/tool clockwise until it is aligned with the closed position marker. Make sure that the cover stays straight while turning it. Do not use force or press the cover excessively.

NOTE: Perform battery replacement with extreme care to ensure that your Suunto G6 remains water resistant. Careless battery replacement may void warranty.

NOTE: You can also use a general golf shoe spike changing tool to open and close the battery compartment cover.

WARNING: This Suunto product contains a Lithium cell. To reduce risk of fire or burns, do not disassemble, crush, puncture, short external contacts, charge or dispose of in fire or water. Replace only with manufacturer specified batteries. Recycle or dispose of used batteries properly.

Refer to the pictures on the following page when changing the battery.

32