Dive logbook MEMLogbook | Suunto HELO2 specification

The dive time and date are registered in the Logbook memory. Always check before diving that the time and date are correctly set, especially after traveling between different time zones.

7.6.1. Dive logbook (MEMLogbook)

The Suunto HelO2 has a very sophisticated, high capacity Logbook and Profile Memory. The data is recorded in the profile memory based on the selected sample rate.

The END OF LOGS text is displayed between the oldest and most recent dive. The following information will be shown on three pages:

THERE ARE THREE PAGES OF LOGBOOK DIVE

INFORMATION. USE SELECT BUTTON TO SCROLL

BETWEEN LOGBOOK PAGES I, II, AND III. THE DATA OF

THE MOST RECENT DIVE IS SHOWN FIRST.

Page I, main display

•maximum depth

•date of dive

•type of dive (MIXED GAS, GAUGE)

•dive start time

•dive number

•oxygen percentage for Mix used in the beginning of the dive

•helium percentage for Mix used in the beginning of the dive

•dive time

Page II

•maximum depth

•surface time after previous dive

•average depth

•warnings

•consumed tank pressure

37

Image 37

Suunto HELO2 manual Dive logbook MEMLogbook

Contents

HelO2 Page Welcome to the World of Suunto Diving Instruments Care and Maintenance of MY Suunto Diving Computer Welcome to the World of Suunto Diving Instruments Using HelO2 with Dive Manager and Dive Planner Or death Or professional diving activitiesPhysician regarding your fitness before diving Stop, and Rgbm adjustments are correct ASC Time symbol and the upward pointing arrowUSE BACK-UP INSTRUMENTS! Make sure that you use back-up Diving with the dive computer Before the instrument has counted down the no-fly time Batteries. Recycle or dispose of used batteries properly Symbol Button Press Main functions Button symbols and functionsSuunto HELO2 AT a Glance Navigating in the menus Down Long Enter Setting mode Setting the time Time mode settingsSetting the date Setting the units Setting the tones Setting the backlightAC water contacts Planning your dives Before DivingSuunto Technical Rgbm Dive computer limitations Emergency ascentsMixed gas diving Alarm indication Alarm reason Audible and visual alarms Error conditions Alarm indicationOut of calculation limits Gas mix Installing the wireless transmitter Wireless transmissionPairing and code selection Omitted decompression Display Indication Transmitting data Setting the gases Mixed GAS Dive mode settingsDive Setting the dive-time alarm Setting the depth alarmSetting the personal/altitude adjustments Before you have ascended above this depth Setting the tank pressure alarm Setting the sample rateSetting the tank pressure Setting the HP code Dive mode activation Accessing Dive modeActivation and pre-checks Alt. adjustment value Altitude range Battery power indicationDiving at altitude Personal adjust- Condition Desired tables Ment value Personal adjustmentsHow the Altitude value is set Before diving Recommended Safety Stops Safety StopsMandatory Safety Stops Other personal injury, and death Deep stops Diving-related information DivingBasic dive data Bookmark Ascent rate indicatorDecompression dives Than at the ceiling Ceiling, ceiling zone, floor and decompression range Display below the floor Accident, you should stay somewhat below the ceilingDisplay above the floor Display at the ceiling zone Before diving in Mixed GAS mode Diving in Mixed GAS modeDefault gas mix settings Oxygen and helium displays Gas change and multiple breathing gas mixes Oxygen limit fraction OLF Diving in Gauge mode After Diving Alarms Symbol on displaySurface interval Dive numbering Dive Planning mode PLANnodec Plan modeRepetitive dive planning Flying after diving Memory mode PLANNoDec modeMixed GAS mode, it does not affect the calculations Dive numbering shown during dive planning Dive logbook MEMLogbook Suunto Dive Planner SDP Dive history Suunto Dive Manager SDM Dive Planner. It ensures that you have a valid decompressionPage Water Contacts and Push Buttons Care and Maintenance of MY Suunto Diving Computer Battery replacement and strap kits must be used FAQsWarranty Battery kit Battery ReplacementReplacing the battery Required tools Wireless transmitter battery replacement Battery compartment lid, indicating a leakMade in a proper manner to avoid any leakage of water into Transmitter Stalling the transmitter battery Transmitter battery kitPage Technical Data Rgbm Battery Suunto Technical Rgbm decompression model Diver safety and Suunto Technical Rgbm modelAfter dive planning Oxygen exposure Altitude diving Copyright Trademark Intellectual PropertyPatent notice User’s responsibility Disclaimers12.2. CE Exclusions and Limitations Warranty Period Other important notices Access to Suunto warranty serviceLimitation of Liability Page Disposal of the Device EAD EAN Glossary No DEC Time Copyright Customer Service ContactsPage TWO Year Warranty Page Page Suunto Oy 4/2009