Diving in Gauge mode | Suunto HELO2 specs

CHANGING GAS MIX. SCROLL THROUGH ENABLED MIXES BY PRESSING THE UP OR DOWN BUTTONS. SELECT NEW MIX BY

PRESSING THE SELECT BUTTON.

NOTE

NOTE

Mix number, O2%, He% and PO2 for the mixes are shown when scrolling. If the set PO2 limit is exceeded , it will be shown with the PO2 value blinking. The dive computer does not allow you to change to a gas whose set PO2 is exceeded. In such a case, the mix is shown but cannot be selected. If the PO2 is less than 0.18 bar, the dive computer gives an alarm.

If no button is pressed in 15 seconds, the dive computer will go back to the dive display without changing the gas mix. Upon ascent, the computer prompts you to change gas when the PO2 level you have set for the next mix allows a gas change. The prompt is an audible 3 beeps and the current O2 or O2: He mix starts to blink.

6.3. Diving in GAUGE mode

If set to GAUGE mode, the dive computer can be used as a bottom timer.

In the GAUGE mode, the total dive time is always displayed in minutes in the lower right corner. In addition, a Dive Timer in the center window displays time in minutes and seconds. The center window Dive Timer is activated at the start of the dive and it can be reset during the dive and used as a stopwatch by pressing the SELECT button.

BY PRESSING THE SELECT BUTTON DURING A DIVE, A BOOKMARK

IS WRITTEN IN THE PROFILE MEMORY, THE DIVE TIMER IS RESET,

AND THE PREVIOUSLY-TIMED INTERVAL IS DISPLAYED BELOW.

Tank pressure (if enabled) is also displayed during the dive.

NOTE	The GAUGE mode does not provide decompression information.
NOTE	If you dive with the GAUGE mode, it is not possible to change between
	the modes before the no fly time (48 h) has counted down.

33

Image 33

Suunto HELO2 manual Diving in Gauge mode

Contents

HelO2 Page Welcome to the World of Suunto Diving Instruments Care and Maintenance of MY Suunto Diving Computer Welcome to the World of Suunto Diving Instruments Using HelO2 with Dive Manager and Dive Planner Or professional diving activities Or deathPhysician regarding your fitness before diving Stop, and Rgbm adjustments are correct ASC Time symbol and the upward pointing arrowUSE BACK-UP INSTRUMENTS! Make sure that you use back-up Diving with the dive computer Before the instrument has counted down the no-fly time Batteries. Recycle or dispose of used batteries properly Symbol Button Press Main functions Button symbols and functionsSuunto HELO2 AT a Glance Navigating in the menus Down Long Enter Setting mode Setting the time Time mode settingsSetting the date Setting the units Setting the backlight Setting the tonesAC water contacts Before Diving Planning your divesSuunto Technical Rgbm Emergency ascents Dive computer limitationsMixed gas diving Alarm indication Alarm reason Audible and visual alarms Error conditions Alarm indicationOut of calculation limits Gas mix Installing the wireless transmitter Wireless transmissionPairing and code selection Omitted decompression Display Indication Transmitting data Mixed GAS Dive mode settings Setting the gasesDive Setting the dive-time alarm Setting the depth alarmSetting the personal/altitude adjustments Before you have ascended above this depth Setting the tank pressure alarm Setting the sample rateSetting the tank pressure Setting the HP code Accessing Dive mode Dive mode activationActivation and pre-checks Battery power indication Alt. adjustment value Altitude rangeDiving at altitude Personal adjust- Condition Desired tables Ment value Personal adjustmentsHow the Altitude value is set Before diving Recommended Safety Stops Safety StopsMandatory Safety Stops Other personal injury, and death Deep stops Diving Diving-related informationBasic dive data Ascent rate indicator BookmarkDecompression dives Than at the ceiling Ceiling, ceiling zone, floor and decompression range Display below the floor Accident, you should stay somewhat below the ceilingDisplay above the floor Display at the ceiling zone Before diving in Mixed GAS mode Diving in Mixed GAS modeDefault gas mix settings Oxygen and helium displays Gas change and multiple breathing gas mixes Oxygen limit fraction OLF Diving in Gauge mode After Diving Alarms Symbol on displaySurface interval Dive numbering Dive Planning mode PLANnodec Plan modeRepetitive dive planning Flying after diving Memory mode PLANNoDec modeMixed GAS mode, it does not affect the calculations Dive numbering shown during dive planning Dive logbook MEMLogbook Suunto Dive Planner SDP Dive history Suunto Dive Manager SDM Dive Planner. It ensures that you have a valid decompressionPage Water Contacts and Push Buttons Care and Maintenance of MY Suunto Diving Computer FAQs Battery replacement and strap kits must be usedWarranty Battery kit Battery ReplacementReplacing the battery Required tools Wireless transmitter battery replacement Battery compartment lid, indicating a leakMade in a proper manner to avoid any leakage of water into Transmitter Stalling the transmitter battery Transmitter battery kitPage Technical Data Rgbm Battery Diver safety and Suunto Technical Rgbm model Suunto Technical Rgbm decompression modelAfter dive planning Oxygen exposure Altitude diving Intellectual Property Copyright TrademarkPatent notice Disclaimers User’s responsibility12.2. CE Exclusions and Limitations Warranty Period Access to Suunto warranty service Other important noticesLimitation of Liability Page Disposal of the Device EAD EAN Glossary No DEC Time Copyright Customer Service ContactsPage TWO Year Warranty Page Page Suunto Oy 4/2009