Chapter 4 Controlling the Projector

Image adjustment

This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button.

Item

Description

Contrast

Adjusts picture contrast (0~ 63)

Brightness

Adjusts picture brightness (0~ 63)

Color

Adjusts picture color saturation (0~ 63)

Tint

Adjusts picture hue (0~ 63)

Item

Description

Color Temp

Sets a color temperature mode. (X Low, Low, Mid, High,

White Balance

Adj.)

 

Red, Green,

Adjusts each white balance respectively. (0~ 63)

Blue

Sharpness

Adjusts picture sharpness. (0~ 31)

*When changing the value of the white balance, the color temp. indicates "Adj."

Item

Description

Gamma

Adjusts brightness of darker part of the picture. (0~ 15)

Noise reduction...

Switches noise reduction mode (OFF, L1, L2)

Progressive scan...Switches progressive mode (ON, OFF, Film)

Reset

Resets the Image adjustment to previous levels.

Store

Stores the Image adjust-

 

ment values. Select an

 

item [Image1 - Image10]

 

from the pull-down menu

 

and click Store button.

Load

Loads the Image mode.

 

Select an image mode

from the pull-down menu and click Load button. There may not be available mode depending on the input mode as shown in

44

 

 

Input source

 

 

Image mode

Video

Computer

 

 

Standard(AV)

*

 

 

Cinema

*

 

 

Standard(PC)

*

 

 

Real

*

 

 

Image1 - 10

 

the table left.

The mark "" means that the available image mode in the selected input source. The error message appears when selecting the disabled image mode indicated with "*".

Page 44
Image 44
Sanyo POA-PN40 owner manual Image adjustment, Select an image mode