Network PIN code setting | Sanyo POA-PN40 manual

Chapter 2 Installation

Network PIN code setting

The network PIN code can be set to restrict access to the setting page of the projec- tor using the web browser.

✽Default network PIN code [0000] means no network PIN code is set.

1 Displaying network PIN code menu

Select network menu and then select "Network PIN code" sub menu. Press SELECT button twice to display the Network PIN code entry pallet.

* The number on the pallet is the current network PIN code.

Network PIN Code

2 Entering the network PIN code

To enter the network PIN code, use point but- tons (▲,▼,7,8) on the projector or the remote control.

3 Fixing the network PIN code

After entering a 4-digit number, select "SET" by using point buttons (7,8) and then press SELECT button.

The red frame moves sequentially left or right with 7 8 button.

The number up or down with d e button.

20

✐The screen 10-key pallet can be used for entering the network PIN code. See item "How to enter the numbers with the screen 10-key pallet" (☞. 21)

The new network PIN code change does not require for the authentication of current network PIN code. It is always effective a newly entered network PIN code. If you for- get the network PIN code, set a new network PIN code.

✐ It is recommended to set up the Network PIN code when you connect the projector to the network. This setting is carried out through the projector’s menu and also it can be set through the network using the web browser. For further information, refer to item "Initial Setting/Network PIN code setting" (☞ p.29).

✐ Valid characters for the network PIN code are only numbers 0 to 9. The number "0000" means no network PIN code is set.

✐ This network PIN code is not to restrict the use of the projector. This network PIN code is to set the security against the use of the projector through the network.

Image 20

Sanyo POA-PN40 owner manual Network PIN code setting

Contents

PJ-Net Organizer Trademarks ComplianceFederal Communication Commission Notice Expression/Abbreviation Use of this manual Contents Contents Page Chapter Preparation Features Web Management function p.39Mail Alert function p.32 Snmp Agent function p.36 Control port ready for external equipment p.61 Automatic On/Off using Clock function p.51Multi-control function p.56 Operating environment Before use Package contains Preparation Chapter Installation Function of the Network Unit p.15 Flow of installationInstallation and network configuration p.16-22 Name and function of each part Installation and network configuration Mounting Connection of LAN cable Network configuration Configure the networkConfirmation of the network menu Selection of network menu Configuration for IP Address/ Sub net/ Gateway*1/DNS*2 How to enter the numbersFixing the network configuration Completing of installation Network PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Enter the IP address Login the setting page of the projectorSelect a display mode and login Display of main setting Main setting page in the Standard Mode display How to use the setting Main setting page in the Light Mode display Type of the setting pallet Text box setting Initial setting With the Network Unit PJLink and password setting Whats PJLink? Date and time setting Auto setting Network configuration Mail setting Setting Smtp server and administrator address Registering and deleting E-mail addresses Option selection for sending alert mail Examples Type and contents of alert mail When the life span of lamp is reached Snmp setting PJ information Snmp setting Basic Setting and Operation Chapter Controlling the Projector Power control and status check Popup confirmation window About projector condition Status Description Controls Input Available selection when the ComputerAnalog input Available selection when the VIDEO/S-VIDEO inputAvailable selection when the Y, Cb/Pb, Cr/Pr input System Image adjustment Select an image mode Sound Menu PC adjustment Setting up the projector Input source Screen mode Video Computer Lamp Corres. Value Reset Save the controls and settings Save/delete the settings Check the saved items Load a control set Set a day or date Timer settingHow to set the timer Check the timer events Change the event modeSet an execute time Select an event action Projector Power Event Projector information Items Description Indication of the lamp status Time, replace lamp immediately Controlling and setting the multi-projectors Multi-control Start/stop the multi control Register the projector Confirmation of registered projector Change the mode of the registered projector Status Controlling all together Conf. & Change page in the light modeSetting all together Chapter Use of Serial Port Serial port setting Use of Serial Port Setting examples for the serial control Control examples Example PJ3 PJ2 PJ1 Use of telnet Preparation Use of telnet Command list table Control the projector with telnet Chapter Appendix Examples of connection Peer-To-Peer connection Gateway Router installed in the network Entrance hall Proxy setting Web browser settingActive Script/JavaScript enable Windows XP Professional Internet Explorer ActiveScript settingExamples OS/Browsers Proxy setting JavaScript Setting Netscape Navigator Proxy setting Product specification TCP/IP Serial port specification Port specificationLAN port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I control the projector by using the telnet application? Can I update the firmware of the Network Unit? What is the MAC address assigned to the Network Unit? What are the rules for IP address assignment? 1AA6P1P5006-- Idzg