16
Chapter 2 Installation
[2] Installation and network configuration
Mounting
1 Disconnect the AC plug from the projector.
Connector cover
2 Remove the connector cover and screw covers (2 pieces) from the projector and insert plug on this product to the option connector.
Screw cover 
3 Tighten two screws by using a coin etc.
!Caution
✐AC cord must be disconnected when mounting or removing this product otherwise it may damage the product.
✐Do not install multiple Network Units into a projector otherwise it may damage the product.
✐ Connect the AC cord after connecting the LAN cable and computer.
