Chapter 4 Controlling the Projector
Power control and status check
Click Power & Status on the main menu. The control page will be dis- played.
By clicking ON or Standby button on the page, the power of the projec- tor can be controlled.
Confirmation window appears when the Standby button is pressed.
| Popup confirmation window |
Item | Description |
PJ status |
|
Power | Displays the status of the lamp. (ON, OFF, On starting up, On cooling down) |
Status | Displays the status of the projector's power. (Refer to next page.) |
Power control | Controls the projector power by clicking the "ON" or "Standby" button. |
PJ temp. |
|
Inside temp.A | Displays the surrounding temperature of lamp in the projector. (Sensor A) |
Inside temp.B | Displays the surrounding temperature of panel in the projector. (Sensor B) |
External temp | Displays the surrounding temperature of the intake vent. (Sensor C) |
....... | The warning icon will appear if the temperature exceeds a specified value. Check |
| if there is no object to obstruct the airflow around the intake or exhaust vent. It |
| might be airfilter clogged. Clean up the airfilter. |
| * The temperature unit can be set either Centigrade or Fahrenheit in item "Initial |
| Setting". (☞p.28) |
40
