Sanyo POA-PN40 owner manual System, Available selection when the ComputerAnalog input

Controls

System

This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu button according to the input signal. Select a system and then click Set button.

Available selection when the Computer[Analog] input

Item	Description
XGA1	It automatically switches to the proper computer
	system of the input signal.
	* The computer system modes (VGA, SVGA, XGA.
	SXGA, UXGA, WXGA...) which meet the input
	signal are listed.

✐If the mode (Mode1 to Mode 10, ExMode11 to ExMode50) which is stored in the item "PC Adjustment" (☞ p.46) is avail- able, they are also listed together with the above mode.

Available selection when the VIDEO/S-VIDEO input

Item	Description
AUTO	It automatically switches to the proper color sys-
	tem of the input signal.
	* The selectable color systems are PAL, SECAM,
	NTSC, NTSC4.43, PAL-M and PAL-N.

✐If the mode (ExMode11 to ExMode50) which is stored in the item "PC Adjustment" (☞ p.46) is available, they are also listed together with the above mode.

Available selection when the Y, Cb/Pb, Cr/Pr input

Item	Description
AUTO	It automatically switches to the proper scanning
	system of the input signal.
	* The selectable scanning systems are 480i, 575i,
	480p, 575p, 720p, 1035i and 1080i.

✐If the mode (ExMode11 to ExMode50) which is stored in the item "PC Adjustment" (☞ p.46) is available, they are also listed together with the above mode.

PJ-NET ORGANIZER

OWNER'S MANUAL

ENGLISH

43