Product specification, Tcp/Ip | Sanyo POA-PN40 specification

Product specification

Product specification

Type	PJ-Net Organizer (Network Unit)
LAN interface	Applicant regulation		IEEE802.3 (10Base-T)
			IEEE802.3u (100Base-TX)
	Data transfer speed		10Mbps/100Mbps
	Data transfer mode		Half duplex/Full Duplex
	Terminal		8-pin modular (RJ-45)
Network protocol	TCP/IP specification		TCP/IP
Serial interface	RS-232C
	Baud rate	0.3/1.2/2.4/4.8/9.6/19.2/28.8/57.6/115.2 Kbps
	Flow control	Hardware flow control (RTS/CTS, Xon/Xoff)
	Parity check	Odd/Even
	Terminal	D sub 9-pin Male
Power source	Supplied from the projector
Power consumption	3.0 watts
Dimensions (W x H x D)	4.13" x 5.20” x 1.32” (105 x132 x 33.6 x mm)
Weight	0.57 lbs (258 g)
Built-in battery	Lithium battery, Type CR2032, 3.0V
Operating temperature	41˚F ~ 95 ˚F (5˚C ~ 35 ˚C)
Storage temperature	14˚F ~ 140˚F (-10˚C ~ 60˚C)

* The specifications are subject to change without notice.

PJ-NET ORGANIZER OWNER'S MANUAL

ENGLISH

77

Image 77

Sanyo POA-PN40 owner manual Product specification, Tcp/Ip

Contents

PJ-Net Organizer Trademarks ComplianceFederal Communication Commission Notice Use of this manual Expression/Abbreviation Contents Contents Page Chapter Preparation Web Management function p.39 FeaturesMail Alert function p.32 Snmp Agent function p.36 Control port ready for external equipment p.61 Automatic On/Off using Clock function p.51Multi-control function p.56 Operating environment Package contains Before use Preparation Chapter Installation Function of the Network Unit p.15 Flow of installationInstallation and network configuration p.16-22 Name and function of each part Mounting Installation and network configuration Connection of LAN cable Configure the network Network configurationConfirmation of the network menu Selection of network menu How to enter the numbers Configuration for IP Address/ Sub net/ Gateway*1/DNS*2Fixing the network configuration Completing of installation Network PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Enter the IP address Login the setting page of the projectorSelect a display mode and login Main setting page in the Standard Mode display Display of main setting Main setting page in the Light Mode display How to use the setting Text box setting Type of the setting pallet With the Network Unit Initial setting Whats PJLink? PJLink and password setting Auto setting Date and time setting Network configuration Setting Smtp server and administrator address Mail setting Option selection for sending alert mail Registering and deleting E-mail addresses Examples Type and contents of alert mail When the life span of lamp is reached PJ information Snmp setting Snmp setting Basic Setting and Operation Chapter Controlling the Projector Popup confirmation window Power control and status check Status Description About projector condition Input Controls Available selection when the VIDEO/S-VIDEO input Available selection when the ComputerAnalog inputAvailable selection when the Y, Cb/Pb, Cr/Pr input System Select an image mode Image adjustment Menu Sound PC adjustment Input source Screen mode Video Computer Setting up the projector Lamp Corres. Value Reset Save/delete the settings Save the controls and settings Load a control set Check the saved items Set a day or date Timer settingHow to set the timer Change the event mode Check the timer eventsSet an execute time Select an event action Projector Power Event Items Description Projector information Time, replace lamp immediately Indication of the lamp status Multi-control Controlling and setting the multi-projectors Start/stop the multi control Confirmation of registered projector Register the projector Status Change the mode of the registered projector Controlling all together Conf. & Change page in the light modeSetting all together Chapter Use of Serial Port Use of Serial Port Serial port setting Setting examples for the serial control Example Control examples PJ3 PJ2 PJ1 Preparation Use of telnet Use of telnet Control the projector with telnet Command list table Chapter Appendix Peer-To-Peer connection Examples of connection Entrance hall Gateway Router installed in the network Proxy setting Web browser settingActive Script/JavaScript enable Windows XP Professional Internet Explorer ActiveScript settingExamples OS/Browsers Proxy setting Netscape Navigator JavaScript Setting Proxy setting TCP/IP Product specification Serial port specification Port specificationLAN port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Can I control the projector by using the telnet application? Why am I not receiving E-mail alert messages? Can I update the firmware of the Network Unit? What are the rules for IP address assignment? What is the MAC address assigned to the Network Unit? 1AA6P1P5006-- Idzg