PC adjustment | Sanyo POA-PN40 instruction

Chapter 4 Controlling the Projector

PC adjustment

Click PC Adj. on the main menu. This function is to adjust the signal from the computer connected to the projector to obtain the proper pic- ture image on the screen.

Up to 60 characters can be used for the Memo of ExMode11 to ExMode50.

Item Description

Current mode ..... Displays a current mode like VGA, SVGA, XGA. SXGA,

UXGA, WXGA, etc. or MODE1 - MODE10, EXT11

	- EXT50 which are the customized mode created by
	using the "Mode Store" function described below.
Auto PC adj	Performs automatic adjustment.
Fine sync	Performs Fine Sync adjustment.(0 ~ 31)
Total dots	Adjust the number of total dots in the horizontal
Clamp	period.
Clamp	Adjusts the phase of the clamp. (1 ~ 255)
Display area
Horizontal	Adjusts the image area horizontally.
Vertical	Adjusts the image area vertically.
Item	Description
Position
Horizontal	Adjusts the horizontal position of the screen.
Vertical	Adjusts the vertical position of the screen.
Reset	Rests the PC adjustments to the previous levels.
Mode Store	Stores the PC adjustment values. Select a mode
	no. [Mode1 - Mode10, ExMode11 - ExMode50]
	from the pull-down menu.
Mode Free	Clear the PC adjustment values. Select a mode
	no. [Mode1 - Mode10, ExMode11 - ExMode50]
	from the pull-down menu.

46

✐The PC adjustment settings can be stored up to 50 sets, 10 sets for Mode1 to Mode 10 are stored into the projector and 40 sets for ExMode11 to ExMode50 are stored into the network unit.

Image 46

Sanyo POA-PN40 owner manual PC adjustment

Contents

PJ-Net Organizer Federal Communication Commission Notice ComplianceTrademarks Expression/Abbreviation Use of this manual Contents Contents Page Chapter Preparation Mail Alert function p.32 FeaturesWeb Management function p.39 Snmp Agent function p.36 Multi-control function p.56 Automatic On/Off using Clock function p.51Control port ready for external equipment p.61 Operating environment Before use Package contains Preparation Chapter Installation Installation and network configuration p.16-22 Flow of installationFunction of the Network Unit p.15 Name and function of each part Installation and network configuration Mounting Connection of LAN cable Confirmation of the network menu Network configurationConfigure the network Selection of network menu Fixing the network configuration Configuration for IP Address/ Sub net/ Gateway*1/DNS*2How to enter the numbers Completing of installation Network PIN code setting How to enter the numbers with the screen 10-key pallet Installation Basic Setting and Operation Select a display mode and login Login the setting page of the projectorEnter the IP address Display of main setting Main setting page in the Standard Mode display How to use the setting Main setting page in the Light Mode display Type of the setting pallet Text box setting Initial setting With the Network Unit PJLink and password setting Whats PJLink? Date and time setting Auto setting Network configuration Mail setting Setting Smtp server and administrator address Registering and deleting E-mail addresses Option selection for sending alert mail Examples Type and contents of alert mail When the life span of lamp is reached Snmp setting PJ information Snmp setting Basic Setting and Operation Chapter Controlling the Projector Power control and status check Popup confirmation window About projector condition Status Description Controls Input Available selection when the Y, Cb/Pb, Cr/Pr input Available selection when the ComputerAnalog inputAvailable selection when the VIDEO/S-VIDEO input System Image adjustment Select an image mode Sound Menu PC adjustment Setting up the projector Input source Screen mode Video Computer Lamp Corres. Value Reset Save the controls and settings Save/delete the settings Check the saved items Load a control set How to set the timer Timer settingSet a day or date Set an execute time Check the timer eventsChange the event mode Select an event action Projector Power Event Projector information Items Description Indication of the lamp status Time, replace lamp immediately Controlling and setting the multi-projectors Multi-control Start/stop the multi control Register the projector Confirmation of registered projector Change the mode of the registered projector Status Setting all together Conf. & Change page in the light modeControlling all together Chapter Use of Serial Port Serial port setting Use of Serial Port Setting examples for the serial control Control examples Example PJ3 PJ2 PJ1 Use of telnet Preparation Use of telnet Command list table Control the projector with telnet Chapter Appendix Examples of connection Peer-To-Peer connection Gateway Router installed in the network Entrance hall Active Script/JavaScript enable Web browser settingProxy setting Examples OS/Browsers ActiveScript settingWindows XP Professional Internet Explorer Proxy setting JavaScript Setting Netscape Navigator Proxy setting Product specification TCP/IP LAN port specification Port specificationSerial port specification DNS How can I restrict access from the computer English You can register up to 10 addresses Why am I not receiving E-mail alert messages? Can I control the projector by using the telnet application? Can I update the firmware of the Network Unit? What is the MAC address assigned to the Network Unit? What are the rules for IP address assignment? 1AA6P1P5006-- Idzg