Chapter 6 Appendix

Operation

QWhy can't I change the controls in the setting page with web browser?

APlease make sure the projector is turned on. If it is in the standby mode, the set- ting is not effective to the projector. To control the projector with a web browser,

the projector must be in the powered-on condition. Also, projectors registered for multi-control cannot have any controls changed if they are in standby mode. But timer and clock settings are always effective, even for projectors in standby mode.

QWhy does it sometimes take a lot of time to complete the page display?

AThe display speed of the page depends on the network environment in which both the projector and computer are placed. It may take much time to complete

the page display if network traffic is heavy. Please consult your network adminis- trator. You can select the Light mode for displaying pages quickly (p.24).

QI use many of the projectors in the network. How can I use names of the projectors to recognize each projector instead of IP addresses?

AYou can manage the projectors with nicknames instead of the IP address. Please see item "Multi-Control" for further information (p.56).

By registering the projector name and IP address with the DNS server, it can be accessed with the nickname from the any computer referred to the DNS server. Please consult your network administrator (p.31).

QHow many numbers of the E-mail address can I register in the E-mail setting page?

AYou can register up to 10 addresses.

82

Page 82
Image 82
Sanyo POA-PN40 owner manual You can register up to 10 addresses