
Getting Started
1.8Connection to the System
1.8.1 Serial/Parallel Interface
•Switch the printer and the computer OFF.
•Connect the interface cable coming from the computer to the printer's standard
•RS232 C serial (1) port or to the optional Centronics Parallel (2) port.
The following values are default settings, see chapter 1.7.2 Selftest Printing Contents.
• | Interface | Dual Interface |
• | 9600 BPS | |
• | Bits/Characters (RS1) | 8 bit |
• | Parity (RS1) | None |
• | Stop Bits (RS1) | 1 |
• | DSR (RS1) | No |
After powering the printer ON both interfaces, serial and parallel, are available for data transfer due to the shared mode. The port to which data is sent becomes active automatically.
For detail information to the ports see Chapter 7 Interface Description.
1.9Installing the Printer Drivers
•You will find the printer drivers on the