Output Solutions 650 manual Print Test

	3.4.4	IBM Configure	3-10
	3.4.5	LQ Configure	3-13
	3.4.6	Save Parameters	3-16
3.5	Print Test	................................................................................................................	3-17
	3.5.1	UserśGuide	3-17
	3.5.2	ASCII Character Set	3-17
	3.5.3	Character Attributes	3-17
	3.5.4 Dr. Grauert (print a letter)		3-17
3.6 Adjustment			3-18
	3.6.1	Photo Sensor Value	3-18
	3.6.2	Left Margin	3-19
	3.6.3	Top Margin	3-20
	3.6.4	Run-in Test	3-20
	3.6.5	Bidirectional Alignment Adjustment	3-21
	3.6.6	Print Photo Values	3-22
	3.6.7	Inquire Photo Values	3-23
	3.6.8	Resume Hardware Parameters	3-24
3.7 Debug / Test			3-24
	3.7.1	Data Backup Mode	3-25
	3.7.2	Printing Saved Data	3-25
	3.7.3	Printing Last Data	3-26
	3.7.4	Printing Flash Data	3-26
	3.7.5	Directly Dump	3-27
3.8	Info Inquiring		3-28
	3.8.1	FW Version	3-28
	3.8.2	HW Configuration	3-28
	3.8.3	Printer ID	3-28
4. Maintenance			4-1
4.1	Cleaning Surrounding Areas		4-1
	4.1.1	Remove the Ribbon	4-2
	4.1.2 Remove the Alignment Unit		4-3
	4.1.3	Cleaning Procedure	4-4
	4.1.4 Install the Alignment Unit		4-4
	4.1.5 Install the Ribbon Cassette		4-4
5. Options			5-1
5.1	Optional Devices		5-1

IV