Output Solutions 650 manual Data Backup Mode, Printing Saved Data

Configuring the Printer

3.7.1 DATA BACKUP MODE

The Data Backup Mode is using the buffer of the printer. All receiving data from the host are saved first. To get data printed select after saving the data the function Printing Saved Data (see paragraph 3.7.2).

Note: The new to be saved data will overwrite the saved data before.

						Key or action		Two line display
						Select Debug / Test		DEBUG/TEST
								HEX PRINTING
					[COMPRESS –]			HEX PRINTING
								DATA BACK UP MODE
					[STOP #] to select			HEX PRINTING
				You hear a short beep.				WAITING FOR DATA ...
The receiving data from the host will be stored in the buffer of the printer.							HEX PRINTING
								OPERATE NATURALLY
			[STOP #] to stop hex printing					HEX PRINTING
								OPERATE NATURALLY
	If you want to leave the off-line mode press [STATION 2] and							SAVE PARAMETERS
				[COMPRESS –] together.				# ACCEPT ST2 = IGNORE
		Press [STATION 2] to ignore.						CX LQ1600K
							ON-LINE

*) The displayed line is depending on the selected emulation.

3.7.2 PRINTING SAVED DATA

All before in the buffer of the printer saved data can be printed in HEX format with this function.

Note: The saved data are printed with two bytes first (in the sample in bold), which indicates the length of the saved data.

Sample: 00000 00 0C 07 0D 07 0D 07 0D 07 0D 07 0D	0 & C * C * C * C * C *
Key or action	Two line display
Select Debug / Test	DEBUG/TEST
	HEX PRINTING
[COMPRESS –]	HEX PRINTING
until the LCD shows:	PRINTING SAVED DATA
[STOP #] to accept	HEX PRINTING
The green Station 2 lamp is flashing.	INSERT A4 SHEET
The printer starts printing vertical lines after inserting a paper.	HEX PRINTING
	PRINTING, WAITING...
After printing and eject the page the LCD shows:	HEX PRINTING
	POWER OFF OR OTHERS

3-25