
Configuring the Printer
Key or action | Two line display |
[STATION 2] | |
Note: The adjustment is only active during power on. | ADJUSTMENT |
[STATION 2] and [COMPRESS | SAVE PARAMETERS |
to leave the | # ACCEPT ST2 = IGNORE |
The new values of adjustment to be default settings can be saved now or ignore the new values. After saving and power OFF and ON the new adjustment is still activated.
3.6.2 LEFT MARGIN
The [FEED/EJECT •] key reduce the current value (left margin is moving to the left side) and the [COMPRESS
After entering adjustment, you have to do the following steps:
Key or action | Two line display |
Select Adjustment | ADJUSTMENT |
| PHOTOSENSOR VALUE |
[COMPRESS –] until LCD shows
ADJUSTMENT LEFT MARGIN
[STOP #] to select | LEFT MARGIN | 17 | ||
• = LEFT | – = RIGHT | |||
| ||||
|
|
| ||
Press [FEED/EJECT •] or [COMPRESS | LEFT MARGIN | 20 | ||
The range is from zero up to 133. | • = LEFT | – = RIGHT | ||
|
|
| ||
Insert an A4 sheet to control the setting. The printer will insert the paper | LEFT MARGIN | (20) | ||
automatically, print the current margin and eject the paper. | • = LEFT | – = RIGHT | ||
[STOP #] to accept | LEFT MARGIN |
| ||
SAVE PARAMETERS | ||||
| ||||
Display after saving | ADJUSTMENT |
| ||
| LEFT MARGIN |
| ||
|
|
|
|