Output Solutions 650 manual Select Current Macro, Select User to Setup, Configure

Configuring the Printer

3.4.1 SELECT CURRENT MACRO

The printer stores up to three user settings in MACRO 1 up to MACRO 3.

Use the [STOP #] key to activate this function. The active macro is displayed first. Press the [COMPRESS –]key until you find the macro for your application and selected it with the [STOP #] key. The printer will save the selected macro immediately. After the procedure the printer changes into the ON-LINE mode and will now work with the new settings.

3.4.2 SELECT USER TO SETUP

With the module SELECT USER TO SET UP you have the choice between MACRO 1, MACRO 2, and MACRO 3. Select the macro witch should be changed.

Note: If you have selected all new items and have these confirmed with the [STOP ￿] key, don't forget to activate the module SAVE PARAMETERS.

3.4.3 CONFIGURE

The following items can be modified according to the C-650 Plus

Note: In the different emulations the items shown are not equal. The option’s which are printed in bold indicate the actual setting.

CONFIGURE

Parameter	Option	Explanation	Note
RESUME DEFAULT VALUE	NO	Select resume default	This option is mainly
	YES	value or not,	used to resume the
		If select YES, jump to	default value when the
		SAVE PARAMETERS the	menu parameters
		parameters will be resumed	have been changed in
		the default value if pressing	disorder.
		[STOP ￿] to confirm.
INTERFACE	DUAL	Select the interface you	DUAL or CX will be
	INTERFACE	want to use.	selected only if an
	SERIAL1		optional interface card
	CX		is installed.
RS1 EMULATION	IBM	Select your RS1 emulation
	LQ1600K

3-6