Getting Started
1.2 Requirements to the Location of the Printer
Environmental Conditions
This printer is designed to be installed in a typical office environment. We claim that customer must follow these operation explanation as below for printer’s well working status and safety of operator:
•Install the printer in an area away from any heat source, air conditioner, or strong airflow.
•Avoid installing the printer where it is exposed to moisture or heat (eg. direct sunlight).
•Avoid installing the printer in a dusty or humid environment.
•Do not put printer to the high temperature, shake or wet environment. And no exposure to direct sunlight. For example boiler, humidifier or fridge.
•Position the Printer on a stable level surface.
Preconditions for Installation
•Place the printer on the stand or a table.
•When processing fanfold paper always place the printer with its front edge slightly off the edge of the table.
Power Requirements
•No special wiring is required. A typical office wall outlet is sufficient. Make sure that the electrical wall outlet to which the printer is connected has a valid ground and that it is able to supply the power needed by the machine.
•Do not plug into the same wall outlet other equipment besides the printer such as coffee machines, copy machines, or air conditioners.
