
Appendix B IBM ProPrinter X24 and IBM ProPrinter II Commands
B.2.3 Line feed
•ESC 0 : Line feed = 1/8"
•ESC 1 : Line feed = 7/72"
•ESC 2 : Line feed = 1/6" or Activate ESC A n
•ESC 3 n : Line feed = n/216" or n/180" (ProPrinter X24); n/216" (ProPrinter II)
•ESC A n : Line feed = n/72" or n/60 (ProPrinter X24); n/72" (ProPrinter II)
•ESC J n : One line feed of n/216" or n/180 (ProPrinter X24); n/216" (ProPrinter II)
•ESC ] : Line feed backward
• ESC [ \ c1 c2 t1 t2 n1 n2: Line feed Value Modification | (ProPrinter X24) | |
|
|
|
ESC 0 |
| |
Line Feed - 1/8" | Hexadecimal code: 1B 30 | |
Sets the 1/8" (3.175 mm) line feed. |
| |
Remains valid until a new line feed command is received. |
|
ESC 1
Line Feed - 7/72" | Hexadecimal code: 1B 31 |
Sets the 7/72" (2,47 mm) line feed.
It remains valid until a new line feed command is received.
ESC 2
Line Feed = 1/6" or Activate ESC A n | Hexadecimal code: 1B 32 |
Sets the line feed of the value according to ESC A n, when it is followed by this command. It remains valid until a new line feed command is received.
Line feed - 1/6":
Sent alone, it sets the 1/6" (4,23 mm) line feed. This is the line feed recommended for alphanumeric texts and ensures that semi graphic characters meet perfectly.
ESC 3 | n |
| (IBM ProPrinter X24) | |
Line Feed - n/216" or n/180 | Hexadecimal code: 1B 33 n | |||
n = 1 - 255 |
|
|
| |
|
|
|
If the parameter AGM : NO has been selected in the SETUP ,it sets the n/216"
(0,1176 x n mm) line feed; If the parameter AGM : YES has been selected in the SETUP ,it sets the n/180" (0,141 x n mm) line feed.
This is the line feed recommended for graphic printing (BIM). If programmed to 24/216", it ensures that the various lines in
It remains valid until a new line feed command is received.
To obtain precise line feeds, always use multiples of 3 for parameter n.