Configuring the Printer
3.7.5 DIRECTLY DUMP
The receiving data from the host will not stored first in the buffer of the printer. They will be printed directly after being received by the printer.
Note: The directly printed data are printed without the two bytes first. So there is no indication of the length of the printed data.
Sample: 00000 07 0D 07 0D 07 0D 07 0D 07 0D 07 0D | C * C * C * C * C * C * |
|
|
Key or action | Two line display |
|
|
Select Debug / Test | DEBUG/TEST |
| HEX PRINTING |
|
|
[COMPRESS | HEX PRINTING |
until the LCD shows: | DIRECTLY DUMP |
[STOP #] to accept | HEX PRINTING |
The green Station 2 lamp is flashing. | INSERT A4 SHEET |
The printer starts printing vertical lines after inserting a paper. | HEX PRINTING |
| PRINTING, WAITING... |
|
|
After printing and eject the page the LCD shows: | HEX PRINTING |
| POWER OFF OR OTHERS |
|
|
Note: During the Directly Dump process, if the printer ejects paper automatically, it indicate that the printing has been finished, but if the printer does not eject paper automatically, press [FEED/EJECT •] key to eject the paper.
Caution: The performance in the two different modes is different. In the Data Backup Mode, the printer doesn’t only print HEX, but also execute the programmer correctly (the bell will sound six times). But in the Directly Dump, the printer just prints in HEX.
