Output Solutions 650 manual Remove the Alignment Unit

Maintenance

4.1.2Remove the Alignment Unit

• Power the printer off

• Open the Top Cover

• Swivel the green print unit lift handle (see the photo on the page before) backwards to lift the print unit entirely.

• Press both Levers (2) to the outside of the printer

• Swivel the Alignment Unit up to about 45°. Now the Pins (3) on both sides of the

• Alignment Unit (1) are in the correct position.

• Lift the Alignment Unit (1) out of the printer.

Note: Both pins (3) are flatten and so it is only possible to take out the Alignment Unit in an angle of 45°!

4-3