C.1 Command Index (By Code)
Note: Ignored in column FUNCTION means the command is treated as NOP, that means, according to defined command format all bytes of this command are discarded.
COMMAND | HEX VALUE | FUNCTION | |
|
|
|
|
BEL | 07 |
| Beep |
BS | 08 |
| Backspace |
HT | 09 |
| Horizontal Tabulation |
LF | 0A |
| Line feed |
VT | 0B |
| Vertical Tabulation |
FF | 0C |
| Form feed for fanfold paper or eject paper |
|
|
| for cut sheet |
CR | 0D |
| Carriage return |
SO | 0E |
| Set double width (one line). |
SI | 0F |
| Set condensed printing in western mode |
DLE B | 10 42 | Soft reset | |
DC1 | 11 |
| On line (Ignored) |
DC2 | 12 |
| Cancel condensed printing for ASCII |
DC3 | 13 |
| Off line (Ignored) |
DC4 | 14 |
| Reset double width for current line. |
CAN | 18 |
| Cancel line buffer |
ESC BEL n | 1B | 07 n | Change current emulation |
ESC SO | 1B | 0E | Set double width (one line) |
ESC SI | 1B | 0F | Set condensed printing for ASCII |
ESC EM n | 1B | 19 n | Control paper loading/ejecting (Ignored) |
ESC SP n | 1B | 20 n | Adds extra space between each character |
ESC ! n | 1B | 21 n | Master select |
ESC $ n1 n2 | 1B | 24 n1 n2 | Set absolute horizontal print position |
ESC % n | 1B | 25 n | Select |
ESC & | 1B | 26 | Define |
ESC ( - nL nH m d1 | 1B | 28 2D nL nH m | Set/reset underline |
d1 d2...d |
| ||
| |||
|
| ||
ESC ( C nL nH mL | 1B | 28 43 nL nH mL | Set page length in defined unit |
mH d1 | mH d1 |
| |
| |||
|