Cabletron Systems DLE23-MA manual Using the Clear Counters Command, Interface Statistics Screen

The Interface Statistics Screen

Frames Frwded (Read-Only)

Displays the number of frames forwarded by the interface.

[1-12], [13-24], or [25-26](DLE2X-MA), [25] (DLE3X-MA) (Selectable)

When the Switch Statistics is displayed, the statistics are displayed for the first 12 ports. These fields allow the user to step to a second or third screen for the same type of information for ports 13 through 24 or ports 25 and 26 of the DLE2X-MA and port 25 (HSIM) of the DLE3X-MA. While on the second or third screen, the user can navigate back to earlier screens by highlighting the [1-12]and/or [13-24]fields and pressing

ENTER.

CLEAR COUNTERS (Command)

This command is used to reset all statistic counters to zero. For details on how to use this field, refer to Section 5.28.1.

5.28.1 Using the Clear Counters Command

To reset all the statistics counters to zero, perform the following steps:

1.Use the arrow keys to highlight the CLEAR COUNTERS field.

2.Press ENTER, the counters for the selected port are reset to zero.

5.29THE INTERFACE STATISTICS SCREEN

The Interface Statistics screen is used to gather MIB-II statistics for all of the DLE2X-MA and DLE3X-MA interfaces (ports 1 through 24 and Fast Ethernet Interface Modules and all backplane interfaces) with the exception of an HSIM installed in the DLE3X-MA.

The MultiSwitch HSIMs gather their own statistics, and may be viewed via the Local Management screens of the applicable HSIM. Refer to your HSIM documentation for information on how to access these screens.

Access the Interface Statistics screen by using the arrow keys to highlight the INTERFACE STATISTICS menu item on the Module Statistics Menu screen and pressing ENTER. The Interface Statistics screen, Figure 5-34, displays.

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-91