Cabletron Systems DLE33-MA, DLE22-MA, DLE32-MA, DLE23-MA manual Setting the Module Time

Chapter 5: Local Management

If the DLM6C-AA chassis has been assigned a chassis date, it is not necessary to assign a module date to the DLE2X-MA and DLE3X-MA. All installed modules recognize the chassis date of the DLM6C-AA.

1.Use the arrow keys to highlight the Module Date field.

2.Enter the date in an MM/DD/YYYY format.

It is not necessary to add separators between month, day, and year numbers. For example, to set the date to 03/17/1997, type “03171997” in the Module Date field.

3.Press ENTER to set the system calendar to the date in the input field.

4.Use the arrow keys to highlight the SAVE command at the bottom of the screen and press ENTER.

If the date entered is a valid format, the Event Message Line at the top of the screen displays “SAVED OK”. If the entry is not valid, Local Management does not alter the current value, but it does refresh the Module Date field with the previous value.

5.15.6 Setting the Module Time

To set the module clock, perform the following steps:

If the DLM6C-AA chassis has been assigned a chassis time, it is not necessary to assign a module time to the DLE2X-MA and DLE3X-MA. All installed modules recognize the chassis time of the DLM6C-AA.

1.Use the arrow keys to highlight the Module Time field.

2.Enter the time in an 24-hour format, HH:MM:SS.

When entering the time in the system time field, separators between hours, minutes, and seconds do not need to be added as long as each entry uses two numeric characters. For example, to set the time to 6:45 A.M., type “064500” in the Module Time field.

5-44 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide