Cabletron Systems DLE23-MA, DLE33-MA, DLE22-MA Shows which ports are currently set as source ports

Port Redirect Function Screen

Although all traffic from the source port (including, if desired, errored frames) is sent to the destination port, normal switching is still performed for all frames on the source port.

Access the Port Redirect Function screen from the Module Specific Configuration Menu screen by using the arrow keys to highlight the PORT REDIRECT FUNCTION menu item and pressing ENTER. The Port Redirect Function screen displays.

Event Message Line
	MS 700 LOCAL MANAGEMENT
	Port Redirect Function
Module Type: DLE22-MA		Firmware Revision:		XX.XX.XX
Slot Number: X		BOOTPROM Revision: XX.XX.XX
Source Port:	Destination Port:	Remap Errors:
============	============	============
1	2	ON
1	3	ON
1	4	ON
2	1	OFF
2	3	OFF
3	4	ON
3	5	ON
3	6	ON
Source Port [1]	Destination Port [1]	Errors	[ON]	Status [ADD]
				RETURN
SAVE	NEXT	PREVIOUS	EXIT		RETURN

LKG-10860-98F

Figure 5-30 Port Redirect Function Screen

The following definitions briefly explain each field of the Port Redirect Function screen:

Source Port (Read-only)

Shows which ports are currently set as source ports.

Destination Port (Read-only)

Shows which ports are currently set as destination ports.

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-83