Cabletron Systems DLE33-MA, DLE22-MA, DLE32-MA, DLE23-MA Optional Features, Description Application

Chapter 1: Introduction

•Designate workstations to receive SNMP traps from the DLE2X-MA and DLE3X-MA interface modules and the DLM6C-AA chassis.

•Configure module specific SNMP MIB objects including the IETF Bridge MIB objects.

Chapter 5 provides detailed information about Local Management of the DLE2X-MA and DLE3X-MA, the optional Fast Ethernet Interface Modules and the DLM6C-AA chassis. The associated High Speed Interface Module user’s guide provides detailed information about Local Management of the applicable HSIM.

1.2OPTIONAL FEATURES

Options for the DLE2X-MA and DLE3X-MA are Fast Ethernet Interface Modules and High Speed Interface Modules, which add remote uplink capability.

Digital Equipment Corporation provides Fast Ethernet Interface Modules for the DLE2X-MA to support uplinks to 100 Mbps Ethernet backbones or high speed connections to local servers. The Fast Ethernet Interface Modules are listed in Table 1-1.

	Table 1-1 Fast Ethernet Interface Modules
P/N	Description	Application
	Uses RJ45	Supports Shielded Twisted Pair (STP) and
DELTX-UI		Category 5 Unshielded Twisted Pair (UTP)
	connector
		cabling.
DELFX-UI	Uses SC	Supports multimode fiber optic cabling.
	connector
DELF3-UI	Uses SC	Supports single mode fiber optic cabling.
	connector

Digital Equipment Corporation provides High Speed Interface Modules for the DLE3X-MA to provide for additional connectivity to other high speed networking technologies such as ATM, WANs and FDDI. The HSIMs available for the DLE3X-MA are listed in the Release Notes.

1-6 DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide