Cabletron Systems DLE32-MA, DLE33-MA manual Remove the screw from the rear standoff. Save the screw

Appendix C: Mode Switch Bank Settings and Optional Installations

Coverplate

Rear

Standoff

Front

Standoffs

LKG-10975-98F

Figure C-3 Coverplate Removal

2.Remove the screw from the rear standoff. Save the screw.

When installing an DELFX-UI or DELF3-UI module into the

!host module, remove the rubber plug on the SC connector before proceeding.

3.Refer to Figure C-4. Gently pull the faceplate of the host module forward to allow room for the Fast Ethernet Interface Modules to be aligned over the connector.

4.Carefully lower the Fast Ethernet Interface Module onto the standoffs while inserting the module connector into the associated motherboard connector.

When inserting the Fast Ethernet Interface Module into the

!motherboard connector ensure that the pins do not bend, as this can damage both the Fast Ethernet Interface Module and

the motherboard connector.

C-6 DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide