Cabletron Systems DLE32-MA, DLE33-MA, DLE22-MA, DLE23-MA manual Setting the Operation Mode

Chapter 5: Local Management

SET ALL PORTS (Toggle)

Ports 1 through 24 can be set all at once to either STANDARD or FULL from this field. To set all ports, refer to Section 5.19.1.

[1-12], or [13-24](Navigation Key)

When the Full Duplex Configuration screen displays, the current operation mode and status information are displayed for the first 12 ports. This field allows the user to step to a second screen for the same type of information for ports 13 through 24. While on the second screen, the user can navigate back to the first screen by selecting the [1-12]option. The user can change the Operation Mode fields while in either the first or second screen.

5.19.1 Setting the Operation Mode

The Operation Mode may be set to Standard Ethernet or Full Duplex either one port at a time or all at once. The following steps describe setting the port Operation Mode for individual ports followed by steps to set the Operation Mode for all ports.

Set the Operation Mode for individual ports as follows:

1.Use the arrow keys to highlight the OPERATION MODE field adjacent to the number of the port that you plan to change.

The Operation Mode for the first 12 ports can be changed on the first screen. To display the Operation Mode for Ports 13 through 24, use the arrow keys to highlight the Ports [13-24]field and press ENTER. To again display the Operation Mode for Ports 1 through 12, use the arrow keys to highlight the Ports [1-12]field and press ENTER.

2.Press the SPACE bar until the appropriate mode (FULL DUPLEX or STANDARD ENET) is displayed.

3.Use the arrow keys to highlight the SAVE command on the bottom line of the screen.

4.Press ENTER. The message “SAVED OK” is displayed.

To set all 24 Ethernet ports for Full Duplex or Standard Ethernet, proceed as follows:

1.Use the arrow keys to highlight the SET ALL PORTS field.

5-62 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide