Cabletron Systems DLE23-MA, DLE33-MA, DLE22-MA Port RX LED flashes green and amber during bootup

Connecting to the Network

RX LED

TX LED

25

26 DELFX -UI

LKG-10871-98F

Figure 3-7 DELFX-UI and DELF3-UI Port

4.Verify that a link exists by checking that the port RX LED is on (flashing amber, blinking green, or solid green). If the RX LED is off and the TX LED is not blinking amber, perform the following steps until it is on:

The port RX LED flashes green and amber during bootup.

a.Check that the power is turned on for the device at the other end of the link.

b.Verify proper crossing over of fiber strands between the applicable port on the DLE2X-MA and the fiber optic device at the other end of the fiber optic link segment.

DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide 3-13