Cabletron Systems DLE32-MA, DLE33-MA, DLE22-MA, DLE23-MA manual Chassis Configuration Screen

Chapter 5: Local Management

CHASSIS CONFIGURATION

The Chassis Configuration screen allows the user to configure operating parameters for the DLM6C-AA chassis. For details, refer to Section 5.7.

SNMP COMMUNITY NAMES

The SNMP Community Names screen allows the user to enter new, change, or review the community names used as access passwords for device management operation. Access is limited based on the password level of the user. For details, refer to Section 5.8.

SNMP TRAPS

The SNMP Traps screen provides display and configuration access to the table of IP addresses used for trap destinations and associated community names. For details, refer to Section 5.9.

CHASSIS ENVIRONMENTAL

The Chassis Environmental screen provides access to chassis power supply status, power supply redundancy status and chassis fan tray status. For details, refer to Section 5.10.

PORT REDIRECT FUNCTION

The Port Redirect Function screen allows the user to redirect traffic from one or multiple modules and ports in the chassis to a specific destination module or port. For details, refer to Section 5.11.

802.1Q VLAN CONFIGURATION

This menu item will only display if one or more modules installed the chassis have been configured to operate as IEEE 802.1Q switches. When selected, this menu item opens the VLAN Main Menu screen. For details, refer to the Port Based VLAN User’s Guide . Section 5.7.7, Setting the Operational Mode, describes how to configure the modules to function as 802.1Q switches.

5.7CHASSIS CONFIGURATION SCREEN

The Chassis Configuration screen, Figure 5-8, allows the user to set the chassis date and time, IP address and Subnet Mask, the operational mode of all modules installed in the chassis, and to view the chassis uptime.

Access the Chassis Configuration screen from the Chassis Menu screen by using the arrow keys to highlight the CHASSIS CONFIGURATION

5-14 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide