Cabletron Systems DLE22-MA, DLE33-MA, DLE32-MA, DLE23-MA manual General Configuration Screen

General Configuration Screen

5.15GENERAL CONFIGURATION SCREEN

The General Configuration screen, Figure 5-17, allows the user to set the system date and time, IP address and subnet mask, the default gateway, the TFTP Gateway IP address, the Operational Mode, the Management Mode, and the COM port configuration. The General Configuration screen also allows the user to Clear NVRAM, and enable or disable IP Fragmentation.

Access the General Configuration screen from the Module Configuration Menu screen by using the arrow keys to highlight the GENERAL CONFIGURATION menu item and pressing ENTER. The General Configuration screen, Figure 5-17, displays.

Event Message Line
		MS 700 LOCAL MANAGEMENT
			General Configuration
Module Type: DLE22-MA				Firmware Revision:	XX.XX.XX
Slot Number: X				BOOTPROM Revision: XX.XX.XX
MAC Address:		00-00-ID-00-00-00		Module Date:	10/11/97
IP Address:				Module Time:	14:23:00
		0.0.0.0
Subnet Mask:	255.255.0.0			Screen Refresh Time:	30 sec.
Default Gateway:		NONE DEFINED		Screen Lockout Time:	15 min.
TFTP Gateway IP Addr:	0.0.0.0			Module Uptime XX D XX H XX M
Operational Mode: [802.1D SWITCHING]				Management Mode: [DISTRIBUTED]
Com: [ENABLED]	Application:		[LM]
Clear NVRAM [NO]	IP Fragmentation [ENABLED]
SAVE			EXIT		RETURN

LKG-10847-98F

Figure 5-17 General Configuration Screen

The following briefly explains each General Configuration screen field:

MAC Address (Read-Only)

Displays the base physical address of the module.

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-37