Cabletron Systems DLE22-MA, DLE33-MA, DLE32-MA, DLE23-MA manual Image File Download Using Runtime

Flash Download Screen

5.24.2 Image File Download Using RUNTIME

Set the DLE2X-MA and DLE3X-MA to download to FLASH using RUNTIME as follows:

1.Use the arrow keys to highlight the Download Method field.

2.Use the SPACE bar to select RUNTIME.

3.Use the arrow keys to highlight the Reboot After Download field.

4.Use the SPACE bar to select either YES or NO. Select YES if you want the module to reboot after the download is completed. Select NO if you want the module to store the new image in FLASH memory until the module is manually reset.

5.Use the arrow keys to highlight the TFTP Gateway IP Addr field.

6.Set the IP address of the TFTP gateway server (this defaults to the same IP address as that set in the TFTP Gateway IP Addr field on the General Configuration screen).

7.Use the arrow keys to highlight the Download Server IP field.

8.Enter the IP address of the TFTP server using the DDN format. For example: 134.141.79.121

9.Use the arrow keys to highlight the Download File Name field.

10.Enter the complete pathway and file name of the image stored on the download server.

For example: /tftpboot/100000.fls

11.Use the arrow keys to highlight EXECUTE at the bottom of the screen and press ENTER. The message “RUNTIME DOWNLOAD. WILL COMMIT TO FLASH.” displays in the event message line at the top of the screen and the new image is downloaded into FLASH memory.

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-81