Cabletron Systems DLE23-MA, DLE33-MA, DLE22-MA, DLE32-MA manual Displaying the SmartTrunk Ports

Module Specific Configuration Menu Screen

5.20.4 Displaying the SmartTrunk Ports

There are three SmartTrunk screens. Each screen displays 12 ports. The NEXT and/or PREVIOUS command is displayed at the bottom of the screen, allowing the user to navigate to either the next or previous screen.

To display the next screen, use the arrow keys to highlight NEXT. Press ENTER and the next screen of entries is displayed.

To display the previous screen, use the arrow keys to highlight PREVIOUS. Press ENTER to view the entries in the previous screen.

5.21MODULE SPECIFIC CONFIGURATION MENU SCREEN

The Module Specific Configuration Menu screen, Figure 5-26, allows the user to select one of five screens to configure ports or check system resources specific to the DLE2X-MA and DLE3X-MA.

The following menu items on the Module Specific Configuration Menu screen may not display if the operational mode of the module has been set to 802.1Q SWITCHING:

PORT REDIRECT FUNCTION

BROADCAST SUPPRESSION

Refer to your Release Notes to see if the functionality provided by the above screens is supported.

Section 5.15.9 provides instructions on setting the operational mode.

Access the Module Specific Configuration Menu screen from the Module Configuration Menu screen by using the arrow keys to highlight the MODULE SPECIFIC CONFIGURATION MENU menu item and pressing ENTER. The Module Specific Configuration Menu screen displays.

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-67