Cabletron Systems DLE23-MA, DLE33-MA, DLE22-MA, DLE32-MA manual 11.1

			Contents
	5.7.3	Setting the Chassis Date	5-18
	5.7.4	Setting the Chassis Time	5-19
	5.7.5	Entering a New Screen Refresh Time	5-20
	5.7.6	Setting the Screen Lockout Time	5-20
	5.7.7	Setting the Operational Mode	5-21
5.8	SNMP Community Names Screen		5-22
	5.8.1	Establishing Community Names	5-24
5.9	SNMP Traps Screen		5-25
	5.9.1	Configuring the Trap Table	5-26
5.10	Chassis Environmental Screen		5-26
5.11	Port Redirect Function Screen		5-28
	5.11.1	Displaying the Source and Destination Entries	5-30
	5.11.2	Changing Source and Destination Ports	5-30
5.12	Module Selection Screen		5-31
	5.12.1	Selecting a Module	5-33
5.13	Module Menu Screen		5-33
5.14	Module Configuration Menu Screen		5-35
5.15	General Configuration Screen		5-37
	5.15.1	Setting the IP Address	5-40
	5.15.2	Setting the Subnet Mask	5-42
	5.15.3	Setting the Default Gateway	5-42
	5.15.4	Setting the TFTP Gateway IP Address	5-43
	5.15.5	Setting the Module Date	5-43
	5.15.6	Setting the Module Time	5-44
	5.15.7	Entering a New Screen Refresh Time	5-45
	5.15.8	Setting the Screen Lockout Time	5-45
	5.15.9	Setting the Operational Mode	5-46
	5.15.10 Setting the Management Mode		5-46
	5.15.11 Configuring the COM Port		5-47
	5.15.12 Changing the Com Port Application		5-49
	5.15.13 Clearing NVRAM		5-50
	5.15.14 Enabling/Disabling IP Fragmentation		5-51
5.16	SNMP Community Names Screen		5-51
	5.16.1	Establishing Community Names	5-53
5.17	SNMP Traps Screen		5-54
	5.17.1	Configuring the Trap Table	5-55
5.18	Switch Configuration Screen		5-55
	5.18.1	Setting the STA	5-58
	5.18.2	Setting the Age Time	5-59
	5.18.3	Setting (Enabling or Disabling) the Port Status	5-59
5.19	Ethernet Full Duplex Configuration Screen		5-60

DLE22-MA, DLE32-MA, DLE23-MA and DLE33-MA User’s Guide ix