Chapter 5: Local Management

5.23HIGH SPEED INTERFACE CONFIGURATION MENU SCREEN (DLE2X-MA ONLY)

When the HIGH SPEED CONFIGURATION MENU is selected for the DLE3X-MA the applicable HSIM Setup screen displays. Refer to the HSIM User’s Guide to set operating parameters for the HSIM installed in the DLE3X-MA.

Access the High Speed Interface Configuration Menu screen from the Module Specific Configuration Menu screen by using the arrow keys to highlight the HIGH SPEED INTERFACE CONFIGURATION MENU menu item and pressing ENTER. The High Speed Interface Configuration screen displays.

The High Speed Interface Configuration screen, Figure 5-28, applies only to ports 25 and 26 of the DLE2X-MA. This screen supports the DELTX-UI, DELFX-UI and DELF3-UI Fast Ethernet Interface Modules that operate at 100 Mbps. If you are configuring a DLE3X-MA, refer to the applicable HSIM User’s Guide, or proceed to Section 5.24.

The High Speed Interface Configuration screen displays the types of interfaces installed in ports 25 and 26, their current operating mode, and indicates if the ports are linked. This screen also allows the user to enable or disable Auto-Negotiation and set the Advertised Ability.

5-72 DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide

Page 136
Image 136
Cabletron Systems DLE33-MA, DLE22-MA, DLE32-MA, DLE23-MA manual High Speed Interface Configuration Menu Screen DLE2X-MA only