Cabletron Systems DLE22-MA, DLE33-MA, DLE32-MA, DLE23-MA Are YOU Sure YOU Want to CONTINUE? Yesno

General Configuration Screen

If the DLM6C-AA chassis has been assigned an IP address, it is not necessary to assign an IP address to the DLE2X-MA and DLE3X-MA. All installed modules have the same IP address as the chassis. If a separate IP address for the module is desired, proceed as follows.

1.Use the arrow keys to highlight the IP Address field.

2.Enter the IP address into this field using Decimal Dotted Notation (DDN) format.

For example: 134.141.79.120

3.Press ENTER. If the IP address is a valid format, the cursor returns to the beginning of the IP address field. If the entry is not valid, the Event Message Line displays “INVALID IP ADDRESS OR FORMAT ENTERED”. Local Management does not alter the current value and refreshes the IP address field with the previous value.

4.Use the arrow keys to highlight the SAVE command, then press ENTER. The warning screen shown in Figure 5-18 displays.

WARNING

YOU HAVE ELECTED TO SAVE ONE OR MORE CONFIGURATION ITEMS THAT REQUIRE RESETTING THIS MODULE.

ARE YOU SURE YOU WANT TO CONTINUE?

YESNO

LKG-10848-98F

Figure 5-18 Configuration Warning Screen

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-41