Cabletron Systems DLE23-MA, DLE33-MA manual Displaying Interface Statistics, Rmon Statistics Screen

RMON Statistics Screen

Interface [XX] (Command)

This command is used to enter an interface number for viewing statistics. For instructions on how to use this command, refer to Section 5.29.1.

CLEAR COUNTERS (Command)

This command is used to reset all statistic counters to zero. For details on how to use this field, refer to Section 5.29.2.

5.29.1 Displaying Interface Statistics

To display the statistics for any interface, proceed as follows:

1.Use the arrow keys to highlight the Interface [XX] field at the bottom of the screen.

2.Press the SPACE bar to increment (or press the DEL (delete) key to decrement) the interface number.

3.Press ENTER (neither the Interface # fields nor the statistics will change until ENTER is pressed).

5.29.2 Using the Clear Counters Command

To reset all the statistics counters of the selected interface to zero, perform the following steps:

1.Use the arrow keys to highlight the CLEAR COUNTERS command.

2.Press ENTER, the counters for the selected interface are reset to zero.

5.30RMON STATISTICS SCREEN

RMON statistics for each interface, on a interface-by-interface basis, are viewed through the RMON Statistics screen shown in Figure 5-35.

Access the RMON Statistics screen by using the arrow keys to highlight the RMON STATISTICS menu item on the Module Statistics Menu screen and pressing ENTER. The RMON Statistics screen displays.

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-95