SNMP Community Names Screen

read-write

This community name allows read and write

 

access to the DLE2X-MA and DLE3X-MA

 

MIB objects, excluding security protected

 

fields for super-user access only.

super-user

This community name permits read-write

 

access to the DLE2X-MA and DLE3X-MA

 

MIB objects and allows the user to change all

 

modifiable parameters including community

 

names, IP addresses, traps, and SNMP objects.

5.16.1 Establishing Community Names

The password used to access Local Management at the Password Screen must have Super-User access in order to view and edit the SNMP Community Names screen. Using a password with read-only or read-write access does not allow the user to view or edit the SNMP Community Names screen.

Any community name assigned in the SNMP Community Names screen is a password to its corresponding level of access to Local/Remote Management. The community name assigned Super-User access is the only one that gives the user complete access to Local/Remote Management.

To establish community names, proceed as follows:

1.Use the arrow keys to highlight the Community Name field adjacent to the selected access level.

2.Enter the password in the field (maximum 31 characters).

3.Press ENTER.

4.Repeat steps 1 through 3 to modify the other community names.

5.Use the arrow keys to highlight SAVE at the bottom of the screen and press ENTER. The message “SAVED OK” displays. The community names are saved to memory and their access modes implemented.

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-53

Page 117
Image 117
Cabletron Systems DLE22-MA, DLE33-MA, DLE32-MA, DLE23-MA manual Establishing Community Names