Cabletron Systems DLE23-MA, DLE33-MA, DLE22-MA, DLE32-MA manual Atmstpstate State

Network Tools

atm_stp_state:

The atm_stp_state command is only available if an DLEHA-UA is installed in the module (e.g., DLE3X-MA). This command allows the user to enable, disable, or check the current status of the Spanning Tree Algorithm on all ATM interfaces.

Syntax:	atm_stp_state [STATE]
Description:	The atm_stp_state command allows the user to
	enable, disable, or check the status of the
	Spanning Tree Algorithm on all ATM
	interfaces. The user must specify the STATE
	option as enable, disable, or status. The STATE
	field is mandatory.
Options:	enable, disable, status
Example:
		-> atm_stp_state status
		Atm Stp is Enabled
		-> atm_stp_state disabled
		-> atm_stp_state enabled
		LKG-10970-98F

DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide 5-115